cone break at work, feeding should be uniform, not segregation. feeding inequality appears to reduce production capacity, product size is too large, frequent spring action, the bowl bearing pressure, rising power.
1. there must be iron removal devices to prevent the crushing chamber over iron, if you frequently had iron, it may be caused by a broken shaft accident.
2. to full capacity production, otherwise there will be the product granularity is too coarse.
broken in 3 production lines than the allocation should be reasonable, so as to maximize the efficiency of the crusher.
4. the spring pressure is not too tight, the pressure is too large will be broken shaft accident occurs, the pressure is too small spring will frequently beat, affecting the normal working of crushers, and the product particle size coarsening.
5. the temperature of lubricating oil can not be too high or too low, otherwise it will affect the machine running.
6. the lubricating oil to be changed frequently, not dirty, dirty will speed up the gear and bowl-shaped tile, bushings and other wear and tear, even the sleeve research death.
7. the drive belt installation can not be too tight, otherwise it would cause the drive shaft rotation is not flexible or fracture; can not be too loose, otherwise it would cause a broken machine boring car.
8. to the material can not be too wet, too sticky, the fine can not be too, can not be too large, otherwise it would cause a stuffy car.
9. the crusher discharge opening plot mine will cause a stuffy car.
the cone crusher (cone crusher) in the actual operation of the process of using one kind or another, as the case does not have to adopt different solutions, some cases presented here are often seen in actual operation.